Daikin ནོར་འཁྲུལ་ཨང་རྟགས་དང་ དེ་གི་དོན། · འབྲུག

Daikin གི་འཛོལ་བའི་ཨང་རྟགས་ 11 ཆ་མཉམ་ ཐེབས་གཅིག་ནང་། རེ་རེའི་དོན་དང་ ཚབས་ཅན་དེ་ཅི་ཅིག་ཨིན་ན། ལག་ལས་པ་ལུ་ག་དེམ་ཅིག་ཁ་པར་བརྒྱབ་དགོཔ་ཨིན་ན།

ཨང་རྟགས	ཆས	དོན་ཚན།
A1	ཨེ་ཀཱན།	A1 means the indoor unit's control board has reported a fault.
A3	ཨེ་ཀཱན།	The condensate drain is blocked or the water level in the drain pan is too high, which can cause water to leak from the unit.
A5	ཨེ་ཀཱན།	A protection has triggered, usually from icing or overload.
A6	ཨེ་ཀཱན།	A fan motor fault: the unit has detected a problem with its fan motor.
C4	ཨེ་ཀཱན།	A temperature sensor circuit is reporting a fault, usually a failed sensor or a wiring or connection problem in its circuit.
C9	ཨེ་ཀཱན།	A temperature sensor circuit is reporting a fault, usually a failing sensor or a loose or damaged connection to it.
E5	ཨེ་ཀཱན།	The compressor is locked or overloaded, often because airflow around the outdoor unit is blocked by leaves or obstructions.
E7	ཨེ་ཀཱན།	A fan motor fault: the fan motor is not running properly, possibly because something is blocking the fan, grille or outdoor unit.
U0	ཨེ་ཀཱན།	Refrigerant level is low, possibly from a leak, so cooling is weak.
U2	ཨེ་ཀཱན།	The supply voltage to the unit is out of range or unstable, usually because of a problem with the mains supply or the installation wiring.
U4	ཨེ་ཀཱན།	Communication fault between the indoor and outdoor units (or with the remote), usually caused by a wiring, connection or control board problem.

སྐད་ཡིག་གཞན: English