AEG washing machine E10: what it means and what to try first · Armenia

Severity: Low

AEG washing machine error E10. The machine is not getting enough water. Check that the tap is open, the inlet hose is not kinked and the inlet filter is clean, then restart once; if it returns, call a technician.

Meaning

The machine is not getting enough water. Check that the tap is open, the inlet hose is not kinked and the inlet filter is clean, then restart once; if it returns, call a technician.

Severity

Low

Try first

  1. Check the tap is fully open. Turn it on and make sure plenty of water comes out.
  2. Look behind the machine. Straighten any kink or twist in the inlet hose or drain hose.
  3. Turn the tap off. Take off the inlet hose and clean the small filter in it next to the tap.

Do not

  • Do not use too much washing powder. Excess foam can block the water level system and cause this error.

Call a pro if

  • E10 comes back after you have checked the tap, hoses and filter.
  • The machine still takes in no water, or too little, with the tap open and the filter clean.
  • You see water leaking from the machine or hoses, or a hose looks damaged.

Source

Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash, AEG Support

The repair: Washing machine not filling repair

Prices for repairs in Armenia are in AMD.

Other AEG codes

  • AEG E20 The machine cannot drain its water.
  • AEG E40 The door is not closed or locked properly.
  • AEG i10 The machine is not getting enough water.
  • AEG i20 The machine cannot drain its water.
  • AEG i30 Leak protection has triggered (water where it should not be).

Brands in our catalog for washing machine: AEG, Bosch, Electrolux, LG, Miele, Samsung, Siemens, Whirlpool. The same code on another brand is not in the catalog yet, and we do not guess what it means.

All AEG codes

Ask pros about your job

Find a pro for E10