AEG dishwasher i30: what it means and what to try first · Ethiopia
Severity: Stop nowAEG dishwasher error i30. Leak protection has triggered (water where it should not be). Switch off, shut the water tap, wipe up any water and call a technician before using it again.
Meaning
Leak protection has triggered (water where it should not be). Switch off, shut the water tap, wipe up any water and call a technician before using it again.
Severity
Stop now
Try first
- Close the water tap to the dishwasher.
- Check the baskets are loaded as the manual says. Make sure no large item stops the spray arm from turning.
- Switch the dishwasher off at the power and leave it overnight with the tap shut. Then switch on and open the tap once. If the program runs through, the fault has probably cleared.
Do not
- Do not keep restarting the dishwasher if i30 comes back. Close the water tap instead.
- Do not put large items like oven trays where they block the spray arm.
- Do not use the dishwasher again until it is checked if i30 returns. The leak into the base may still be there.
Call a pro if
- i30 appears again after you have switched off overnight and restarted once.
- You can see water leaking under or around the dishwasher, or the drain pump keeps humming.
- You think there is an internal leak, or you cannot find why water collected in the base.
Source
Dishwasher displays error code i30, AEG UK Support
The repair: Dishwasher leak repair
Prices for repairs in Ethiopia are in ETB.
Other AEG codes
- AEG E10 The machine is not getting enough water.
- AEG E20 The machine cannot drain its water.
- AEG E40 The door is not closed or locked properly.
- AEG i10 The machine is not getting enough water.
- AEG i20 The machine cannot drain its water.
Brands in our catalog for dishwasher: AEG, Bosch, Electrolux, LG, Miele, Samsung, Siemens. The same code on another brand is not in the catalog yet, and we do not guess what it means.