Electrolux dishwasher i30: what it means and what to try first · Japan

Electrolux dishwasher error i30. Leak protection has triggered (water where it should not be). Switch off, shut the water tap, wipe up any water and call a technician before using it again.

Meaning

Leak protection has triggered (water where it should not be). Switch off, shut the water tap, wipe up any water and call a technician before using it again.

Severity

Stop now

Try first

1. Close the water tap first.
2. Check the baskets are loaded as the manual says. Make sure no large item stops the spray arm from turning.
3. Switch off at the mains and leave it off overnight with the tap shut. Then switch on, open the tap and start a programme.

Do not

• Do not stack large items such as oven trays where they block the spray arm.
• Do not keep restarting it if i30 comes back. Close the tap and arrange a repair.
• Do not leave the water tap open while the code is showing.

Call a pro if

• The i30 code comes back after you have switched off overnight and tried again.
• You see water on the floor or under the dishwasher, or it keeps leaking.
• The drain pump hums or runs non-stop, or there is a lot of foam that does not clear overnight.

Source

Dishwasher displays error code i30, Electrolux UK Support

The repair: Dishwasher leak repair

Prices for repairs in Japan are in JPY.

Other Electrolux codes

• Electrolux E10 The machine is not getting enough water.
• Electrolux E20 The machine cannot drain its water.
• Electrolux E40 The door is not closed or locked properly.
• Electrolux i10 The machine is not getting enough water.
• Electrolux i20 The machine cannot drain its water.

Brands in our catalog for dishwasher: AEG, Bosch, Electrolux, LG, Miele, Samsung, Siemens. The same code on another brand is not in the catalog yet, and we do not guess what it means.

All Electrolux codes

Ask pros about your job

Other languages: 日本語